While the throttle button is released, my HC shows as if i'm holding the throttle. For example, there's always 17% throttle on.
Note! This can only happen on V.1 hand controllers.
The reason for this is, that the magnet sensor gets stuck. If your HC is showing anything else than 00% when throttle is not pressed, you can re-calibrate the magnet sensor by:
- Turn off the battery in case it's turned on.
- Push down the throttle fully and place a PKL on the side of the HC.
- Release the throttle and slowly swipe the PKL up, along the side of the HC.
- If the magnet sensor does not re-calibrate after three tries, please contact Support for further assistance.