Storage

1. Board Bag

The Awake RÄVIK board bag comes with removable wheels which are recommended for use, even when transporting the board short distances. To install the wheels, slide the axle through the opening on the bottom of the bag, and then attach the wheels on either end of the axle using the quick-release button. Never drag the Awake RÄVIK along the ground or other surfaces, as this can cause wear to the body and compromise its water-protective capacity. It may also sharpen the fins to the point of becoming cutting-edge and pose a risk to personal safety.

2. Board Storage

Never store the Awake RÄVIK in water as it may result in biological growth on and around the impeller and the jet housing, causing power loss. If you have to leave the Awake RÄVIK in water for a short time, always make sure it's moored securely. Never leave the Awake RÄVIK unattended to prevent children or other inexperienced persons from using it. For convenient storage, we also offer a wall mount for the Awake RÄVIK.

3. Flex BP Storage

When storing the RÄVIK for long periods of time, it’s recommended to remove the Flex BP and store it separately. The Flex BP must be charged between 20% and 80% of maximum capacity when in storage (4 bars on the LED display). Always be sure to store your Flex BP in a safe and dry environment that is not subject to large fluctuations in temperature. Check the charge level periodically (approx. once a month) during storage to ensure the charge remains within the required range. 

4. Flex HC Storage

The Flex HC should be rinsed with fresh water after every use. It must be charged to 80% of its maximum capacity when stored for long periods of time. Check the charge level periodically (approximately once a month) during storage to ensure the charge remains within the required range.