Katja Djukic

Always perform the below listed steps before every ride 1. Make sure the Flex BP and Flex HC are fully charged and activates properly. 2. Check CM and BP connector pins for corrosion and potential...

Always perform the below listed steps after every ride 1. Rinse off the equipment with freshwater to prevent corrosion on the metal parts and to remove sand grains and other sharp particles that ca...

Tutorials and more   4 STEPS TO GET ON THE BOARD 1. Start accelerating the board while lying on the stomach. Try some turns and feel how the board reacts. Keep riding like this until you feel ...

1. Place the footstraps for the desired riding style, standard or goofy. Standard = Left foot front Goofy = Right foot front   Not sure if you’re standard or goofy? Stand straight and ask someo...

Safety information  2.1 General safety precautions  2.1.1 Limitation on who may operate an Awake RÄVIK : Awake recommends a minimum operator age of 16 years old. An adult shall always be present a...

1. After each ride, rinse all modules and connectors with freshwater and clean the jet from any debris. For maximum performance and corrosion protection, treat the connectors on both board and b...

Rävik 1. Rinse, clean and dry off all gear before packing it in the board bag2. Place all items in the board bag and secure the board with the straps. NOTE! It is recommended to transport the boar...

1. Vehicle Transport Transporting the Awake RÄVIK for longer distances is best done using a personal vehicle, such as a car, as public transport may not allow oversized luggage and could damage the...