Katja

Content1. RÄVIK Inventory2. Install the fins3. Charge the battery4. Connect the battery5. State of charge6. Download the Awake Link app7. Pair the controller8. Video tutorial RÄVIK Inventory ...

Safety information  2.1 General safety precautions  2.1.1 Limitation on who may operate an Awake RÄVIK : Awake recommends a minimum operator age of 16 years old. An adult shall always be present a...

Charge the battery 1. Make sure that all connection points are dry and free from debris.   2. Connect the charger to a power outlet, place the BP on the charger, lock it and activate it wi...

Always perform the below listed steps before every ride 1. Make sure the Flex BP and Flex HC are fully charged and activates properly. 2. Check CM and BP connector pins for corrosion and potential...

1. After each ride, rinse all modules and connectors with freshwater and clean the jet from any debris. For maximum performance and corrosion protection, treat the connectors on both board and b...

Installing the Wings 1. Fasten the screws with the complimentary Allen key. 2. When receiving your Powder or Fluid wings set, you will find Shims for both front and rear wings. See the Awa...

VINGA 3 Hull: Carbon/Innegracomposite foam coresandwich monocoque Passenger Capacity: One (1) operator Max Rider Weight: 110 kg / 242 lbs Absolute Max Weight: 136 kg / 300 lbs Volume: 95 ...

Rävik 1. Rinse, clean and dry off all gear before packing it in the board bag2. Place all items in the board bag and secure the board with the straps. NOTE! It is recommended to transport the boar...