Katja

Articles

Recent activity by Katja Recent activity Votes
  • VINGA Specs.

    VINGA 3 Hull: Carbon/Innegracomposite foam coresandwich monocoque Passenger Capacity: One (1) operator Max Rider Weight: 110 kg / 242 lbs Absolute Max Weight: 136 kg / 300 lbs Volume: 95 ...

  • Rävik and Vinga transport

    Rävik 1. Rinse, clean and dry off all gear before packing it in the board bag2. Place all items in the board bag and secure the board with the straps. NOTE! It is recommended to transport the boar...

  • State of charge

    State of charge Battery Activate the battery pack with the Power Key Leash to see the state of charge. • Green lights pulsing = charging • 5x green lights = 100% charge • 1x green light = 2...

  • Ride modes

    Ride Wizard Personalize your riding with the Ride Settings Wizard in the Awake Link app. Enter your experience level, weight and product and the Ride Settings Wizard will generate the optimal...

  • After the ride

    Always perform the below listed steps after every ride 1. Rinse off the equipment with freshwater to prevent corrosion on the metal parts and to remove sand grains and other sharp particles that ca...

  • Flex BP Specs.

    Awake Flex BP SR/XR Weight SR: 18 kg / 40 lbs Weight XR: 22 kg / 48.5 lbs Battery SR: Li-Ion 1.9 kWh Battery XR: Li-Ion 2.85 kWh Category: D* * – EU DIRECTIVE 94/25/EC – The definiti...

  • Install foot straps

    1. Place the footstraps for the desired riding style, standard or goofy. Standard = Left foot front Goofy = Right foot front   Not sure if you’re standard or goofy? Stand straight and ask someo...

  • Power Levels

    Customise your ride by fine-tuning your settings with 10 Power Levels per Ride Mode. Control them from the water with the hand controller. 1. Deactivate the battery by removing the Power Key ...

  • Storage and winterization

    If you are done for the season and want to store you gear for a longer period of time (longer than 2 months) adhere to the below listed steps to ensure that your equipment is stored correctly. ...

  • Re-Calibrate HC V.1

    NOTE! This procedure only applies to Awake Flex Hand Controller Version 1. How to tell if you have a version 1 controller: If the hand controller shows a large Awake logo on startup and do not vibr...