Customise your ride by fine-tuning your settings with 10 Power Levels per Ride Mode. Control them from the water with the hand controller.
| 1. Deactivate the battery by removing the Power Key |
| 2. Push and hold down the throttle button on the controller |
|
3. While holding the controller throttle, activate the battery by placing the Power Key in one of the receptacles. The main LEDs will be turned off when entering the selection menu. Power Levels are displayed on the small LEDs where each level is represented by a half light. |
| 4. Push and release the HC throttle to increase the level. Lock the setting by holding the HC throttle for 3 seconds. |
Comments
0 comments
Please sign in to leave a comment.